Digital Dual Band Home Repeater

With the development of mobile communication technology, more and more new communication technologies (like 3G & 4G) will be adopted nowadays. Hence, telecom operators have to optimize their network and offer best service to users to improve their competitive ability. However, 3G or 4G signals attenuate severely when traveling through walls, floors, and windows, leaving more than 40% of all indoor spaces with inadequate coverage and poor data throughput. Then the operators need a cost-effective solution to resolve such coverage problems easily and rapidly.

Helios® SignalTouch Series Digital Dual Band ICS Home Repeater is a carrier-grade, consumer-friendly digital smart signal booster that maximizes a subscriber’s indoor wireless experience by eliminating in-building dead zones. It is really cost-effective and intelligent solution to solve the last mile coverage problem, which is adopting SDR (Software Define Radio) technology basis on FPGA & DSP (Digital Signal Processing) platform. It enables on-the-fly filter to be changed/upgraded by software without expensive hardware upgrading.

Fully wireless design, built-in Donor Antenna and Service Antenna achieve true “Plug & Play” – basically no need for configuration and free of maintenance. In fact, SignalTouch will be able to intelligently and automatically senses and adapts to its dynamic RF environment. By continuously monitoring the gain and making real-time adjustments, the system will never overdrive the base station or raise the noise floor. SOC & Embedded architecture enables to delivery significantly improving network coverage with very low power consumption.


Key Feature

  • Available customized dual bands for 1800MHz, 2100MHz and 2600MHz.

  • Supports all major wireless technologies include GSM, EDGE, DCS, UMTS, LTE FDD.

  • Fully wireless, plug-and-play, DSP architecture.

  • SOC & embedded architecture enable delivery of significantly improved network coverage with very low power consumption.

  • Supports upgrading filter parameters in case of frequency re-farming by software.

  • Built-in Smart Donor Antenna and Service Antenna, plug-and-play, no-touch ease of use and installation

  • Better out of band rejection than analog SAW filters.

  • Built-in Micro USB interface for local control.

  • Built-in individual AGC & ALC functions for each sub-band.

  • High working Gain min. 75dB and cost-effective solution making coverage more affordable for small building or driving a DAS in large buildings.

  • Built-in patented 25dB ICS (Interference Cancellation System) mechanism to ensure stable operation.

  • Concise LED User Interface (UI) allows quick and easy installation by end-user.

  • Embedded additional SMA-type connector for external donor antenna and Indoor D.A.S connection in small/medium coverage area.


Application

To expand cellular signal coverage of fill signal blind area where signal is weak or unavailable.

  • Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Apartments, Packing Lots, Metro, Tunnels and Elevators etc.


SPECIFICATION
  • Frequency

    Dual bands operating supporting all major cellular frequency bands including 1800MHz, 2100MHz and 2600MHz.

  • Bands Support

    Supports all major wireless technologies include GSM, EDGE, DCS, UMTS, LTE FDD

  • Filter Design

    5-25MHz tunable per band by software

  • Max Gain

    75dB (+/-2dB)

  • Max RF Composite Power

    +18dBm

  • AGC Range

    Max 30dB

  • Noise Figure

    Max 8dB @ Max Gain

  • Time Delay

    8µs

  • Embedded Donor and Service Antennas

    Frequency: See Above Gain: 5dBi VSWR: 1.5 F/B: 25dB

  • Local Monitor & Control

    Via Helios LMT Software + Micro USB port to monitor & Control Power on/off, Over Power, Oscillation Detection, Isolation Measurement, ICS Switch, Temperature, Power Supply, VSWR, Output Power, Gain, ATT and etc.

  • Remote Monitor & Control

    Via Helios LMT Software + Micro USB port to monitor & Control Power on/off, Over Power, Oscillation Detection, Isolation Measurement, ICS Switch, Temperature, Power Supply, VSWR, Output Power, Gain, ATT and etc.

  • Connector

    2*SMA-Type Female for additional externa donor and service antenna, 1*Micro USB Port

  • Mounting Type

    Both for Desk-top and Wall Mount

  • Power Supply

    110/240VAC

  • Complies with

    ETSI EN 301 908-1, ETSI 301 908-15, ETSI EN 301 489 -1 ETSI EN 301 489 –50, ETSI TS 125 106, ETSI TS 136 106