Digital Dual Band RF Repeater

Helios® Digital Dual Band RF Repeater is a cost-effective and intelligent solution that solves the last mile coverage problem, and dual band operating supporting all major cellular frequency bands inc

Helios® Digital Dual Band RF Repeater is a cost-effective and intelligent solution that solves the last mile coverage problem, and dual band operating supporting all major cellular frequency bands including 700MHz, 800MHz, 1800MHz, 1900MHz, 2100MHz or 2600MHz and supports all major wireless technologies include GSM, EDGE, DCS, CDMA, UMTS, LTE FDD, PCS and AWS.

The design adopts SDR (Software Defined Radio) technology based upon our FPGA & DSP (Digital Signal Processing) platform. It enables on-the-fly filter & Bandwidth configure/upgrade by software without expensive hardware upgrading. Built-in individual Gain and ALC setting for each sub-band for multi-technology application (e.g. GSM/UMTS) for single or multi-operator applications.

The Repeater is connected via coaxial cable to a Donor Antenna and Service Antenna or DAS. The Donor Antenna is placed outside the building where it has access to a BTS signal, and the Service Antenna or DAS are placed in the building where they can extend radio coverage to the areas lacking coverage.



Key Feature  

  • Dual band operating supporting all major cellular frequency bands including 700MHz, 800MHz, 1800MHz, 1900MHz, 2100MHz or 2600MHz.

  • Supports all major wireless technologies include GSM, EDGE, DCS, CDMA, UMTS, LTE FDD, PCS and AWS.

  • Band Selective or Channelized Software Defined Filtering, and BW or number of filters can be tunable or upgradeable by software.

  • Supports upgrading filter parameters in case of frequency re-farming by software.

  • Better out of band rejection than analog SAW filters.

  • LED Indicator and Laptop via IP Web Browser GUI and RJ-45 port for local control.

  • Built-in 2G or 3G or 4G modem as option for remote control.

  • Built-in individual AGC & ALC functions for each sub-band.

  • High working Gain min. 95dB and cost-effective solution making coverage more affordable for small building or driving a DAS in large buildings.

  • RF composite power +33dBm to +43dBm for medium & large coverage application.

  • Aluminum-alloy casing with IP65 protection and cool system without fan.

  • Compact size and light weight, easy to install on wall or pole.


Application

To expand cellular signal coverage of fill signal blind area where signal is weak or unavailable.

  • Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.

  • Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Apartments, Packing Lots, Metro, Tunnels and Elevators etc.


SPECIFICATION
  • Frequency

    Dual band operating supporting all major cellular frequency bands including 700MHz, 800MHz, 1800MHz, 1900MHz, 2100MHz or 2600MHz.

  • Bands Support

    Supports all major wireless technologies include GSM, EDGE, DCS, CDMA, UMTS, LTE FDD, PCS and AWS

  • Filter Design

    Band Selective or Channelized based upon Software Defined Filtering, and BW or number of filters can be tunable or upgradeable by software. * Contact your local Helios Solutions sales representative to get more details for multiple sub-bands or channels requirement.

  • Passband Max Gain

    95dB (+/-2dB)

  • Ripple in Band

    +/- 2.5dB

  • Max RF Composite Power

    +33dBm, +37dBm, +40dBm, +43dBm

  • AGC Range

    Max 60dB

  • Noise Figure

    Max 6dB @ Max Gain

  • Time Delay

    Max 6µs (depending on filter bandwidth and required adjacent channel rejection

  • Local Monitor & Control

    LED Indicator and Laptop via IP Web Browser GUI and RJ-45 port to monitor & Control Power on/off, Over Power, Oscillation Detection, Isolation Measurement, Door Status, Temperature, Power Supply, VSWR, Output Power, Gain, ATT and etc.

  • Remote Monitor & Control

    Via Helios Netview OMC Software + Option embedded 2G/3G/4G Wireless Modem + Chargeable Li-ion Battery, SNMP V3 compatible, Remote IP viewing +External Modem.

  • Connector

    2*N-Type Female, 2*RJ 45 Port

  • Mounting Type

    Wall Mount

  • Power Supply

    110/240VAC

  • Complies with

    ETSI EN 301 908-1, ETSI 301 908-15, ETSI EN 301 489 -1 ETSI EN 301 489 –50, ETSI TS 125 106, ETSI TS 136 106