5G NR Off-Air Repeater MIMO

In 5G, the main advantage is greater bandwidth, allowing higher download speeds. HELIOS® 5G-NR Single Band Repeater is a carrier-grade, consumer-friendly digital smart signal booster that maximizes a subscriber’s indoor wireless experience by eliminating in-building dead zones. With HELIOS® 5G Base Band TDD synchronization and SDR (Software Define Radio) technology, it enables accurate, speedy and reliable synchronization with 5G BTS and working in harmony with the Macro network.

HELIOS® 5G repeater is designed for TDD Telecom Operators who are looking to enhance 5G coverage where cellular signal is weak or unavailable or poor data throughput. It is a real intelligent solution to solve the last mile coverage problem. Versions with support in 5G FDD Bands are available, as are Multi-Band 5G / LTE versions.

The Repeater is connected via coaxial cable to a Donor Antenna and Service Antennas, The Donor Antenna is placed outside the building where it has access to a Macro BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind areas.

  • 5G Band N-78 support
  • 2*2 MIMO support
  • IMOP Support (Isolation Measurement and Oscillation Protection)
  • Greater filter bandwidth design for 5G application
  • 5G Base Band TDD synchronization support
  • SOC & embedded architecture enables delivery significantly improved network coverage with very low power consumptio
  • Built-in RJ-45 interface for local control
  • Optional built-in wireless modem for HELIOS NMS remote control
  • Built-in AGC & ALC function
  • Gain 75dB
  • RF Output power +26dBm

Electrical Specification

Frequency Range: 5G Band 3400-3800MHz

Filters Design: 100MHz (Optional 200 MHz or more)

Duplex Mode: TDD

Output Power per Band: UL 20±2dBm, DL 26±2dBm

Gain: UL 70±2dB, DL 75±2dB

Uplink Noise Figure: Max 6dB

Group Time Delay: Max 5µS

Oscillation Protection: IMOP Feature supported (Isolation Measurement and Oscillation Protection)

Monitoring: Web Browser GUI and wireless modem, SNMP V3+MIB File

Power Supply: AC220V (+/-15%), 50Hz

Power Consumption: Max 70W

External and  Connection

RF Port: 4*N-Type Female Connector

Local Control: RJ45

Power Connector: Three core aviation socket

Mechanical Specification

IP Rating: IP30