FiberOnAir™ 600 PtP&PtMP Wireless Connectivity in Sub-6GHz Bands

HELIOS FiberOnAir™ 600 High-capacity Point-to-Point (PtP) and Point-to-Multipoint (PtMP) series are innovate high-capacity Wireless Backhaul solution, excellent for operation in heavily congested unlicensed & licensed bands in Sub-6GHz where spectrum resource is scare.
Delivering up to 600Mbps per sectors FiberOnAir™ 600 series is the ideal choice for last mile connectivity, and high-end applications requiring guaranteed SLA. It ensures revenue growth for residential and enterprise service provider by delivering fiber-like connectivity with incomparable resiliency.

  • Supports various unlicensed band as 2.4/3.5/5.8GHz, also supports customized frequency from 220MHz to 6GHz
  • High-capacity Base Station (HBS): Up to 600Mbps aggregate per sectors, 2.4Gbps per cell (4 sectors using 2*80MHz)
  • Variety of Subscriber Unit (HSU): 10, 25, 50, 100, 150, 300Mbps aggregate throughput
  • Flexible channel bandwidth as 1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, 20MHz, 40MHz
  • Advanced OFDM & MIMO 2*2 for LOS/nLOS/NLOS performance, high spectral efficiency as up to 7.5bps/Hz
  • Max RF Tx Power is up to 25dBm
  • Supports Point-to-Point and Point-to-Multipoint
  • Up to 64 concurrent Subscriber Unit and other 64 standby Subscriber Unit per Base Station / Sector
  • Modulation types: support QPSK to 256QAM and ACM (Adaptive Modulation and Coding)
  • Supports moving platform with high speeds of up to 500Km/hours
  • Low jitter & low latency
  • TDD radio synchronization enables dense deployments with maximum performance, using built-in GPS it prevents mutual interference and increase network capacity and range
  • High durability – IP66/67 enclosure
  • Support high gain integrated antenna internally or external high gain antenna
  • Dynamic Bandwidth Allocation (DBA) optimally maximizes throughput for active users demanding various service levels
  • Excellent operation in LOS /nLOS/NLOS conditions

Maximum Net Aggregate Capacity

Frequency Bands: 2.4/3.5/5.8GHz

Capacity: High-Capacity Base Station (HBS): 150Mbps, 300Mbps, 600Mbps

High-Capacity Subscriber Unit (HSU): 10, 25, 50, 100, 150, 300Mbps

Radio and Modem

Number of HSUs per HBS: Up to 64 concurrent HSUs and other 64 standby HSUs simultaneously

Channel Bandwidth: 1.4/3/5/10/15/20/40MHz configurable, Dynamic Channel BW selection

Modulation: QPSK ~ 256QAM,Fixed mode or Adaptive Coding and Modulation (ACM), hitless auto-rate support

Automatic Transmit Power Control (ATPC): 20dB

TDD Synchronization: Inter & Intra site synchronization, embedded GPS receiver

DFS (FCC & ETSI): Support

Radio Access Scheme: OFDM, Auto MIMO 2*2

Adaptive Modulation & Coding: Support

SLA Management: CIR, MIR, Best-Effort

Latency: Max 10msec

Duplex Technology: TDD

Uplink/Downlink BW Allocation: Configurable: Symmetric or Asymmetric

Encryption: AES 128 / AES 256

Management

Network Management: SNMP V3 Protocol, Telnet, HTTP, IPv4 & IPv6

Local Management: WEB LCT, 10/100 Base-T(X) interface

RF Tx & Rx

Max Tx Power: 25dBm at HBS & HSU

Embedded Antenna: Frequency Range: 5.2-5.9GHz; Gain: 14 dBi

Typical Receive Sensitivity : QPSK: -96dBm; 16QAM: -90dBm; 64QAM: -84dBm; 256QAM: -78dBm

Tx Power Control Range: 20dB

Tx Power Control Step: 0.5dB

Rx Overload: -5dBm

Interface & Networking

Ethernet Interface Type: 10/100/1000Base-T, support PoE

Sub Convergence Layer: Layer 2 (Bridging learning of 4K MAC addresses)

QoS: Support

VLAN: 802.1Q and QinQ

Test & Approvals

Radio Spectrum: EN 301 893, EN 302 326-2, EN 302 502

Safety: EN 60950-1, EN 60950-22

EMC: EN 301 489-1, EN 301 489-4

Mechanical, Electrical & Environment

Operating Voltage: 12VDC or 24VDC or PoE

Power Consumption: Max 30Watts

Dimension: 270×300×95mm

Weight: Max 2.5kg

Operating Temperature: -10 degree C to +60 degree C

Operating Humidity: 0~100%

IP Protection: IP67